
Monorean Pro Guide
The advanced version of the Monorean earpieces.
Bluetooth Earpiece for cell phone
During the exam, the hidden Bluetooth earpiece Monorean Pro will allow you to make a phone call using your cell phone. Furthermore, there is a signal button. The Beeper Pushbutton allows you to pick up an incoming call or dial the last phone number you dialed without having to touch your phone. If you want to listen to the dictations that you previously recorded instead, use the Bluetooth earpiece with your MP3 player: Bluetooth earpiece for MP3 player with pushbuttons.
Bluetooth Earpiece for cell phone, step by step
-
Charge the control box using the connector with the label:
to your computer with the USB cable. Make sure your computer’s USB port is in perfect condition. While the control box is charging, keep the computer running.
Store the device fully charged.
The battery indicator (
) will be red indicating: charging. It’ll be fully charged once the indicator turns green.
-
The inductive collar should be worn around your neck. The side with the word monorean should be placed just below the height of your clavicle, above the end of your breastbone. When you put a shirt on, the back side of the collar will not touch your neck but will instead go a little down to the area of your upper back, making it impossible to see.
Use cloth or plastic surgical tape to secure the collar to your body. Pay special attention to the collar areas marked Fragile Area.
-
Connect the collar to the control box’s connector with the label:
-
Turn on the control box using the “ON-OFF“ switch
Make sure it’s fully charged
-
Connect the control box to your phone or Bluetooth Walkie-Talkie via Bluetooth. To do so, press and hold the Bluetooth button for five seconds or until the blue light flashes. Then, on your cell phone, MP3 player, or Walkie-Talkie, look for the device labeled Monorean Pro and select it. Please refer to the manufacturer’s instruction manual for your specific model for additional information. If you are prompted for a Bluetooth password, it will be 0000. Keep in mind that your phone must always be with you or within 10 meters (30 feet) from Monorean Pro’s control box.
The Monorean Pro control box optimizes power usage so that the battery can perform at its best. If the control box’s primary battery runs out, it will keep a reserve to keep the Bluetooth connection going.
The Bluetooth link Monorean Pro won’t be visible by other devices once your phone is paired with Monorean Pro.
-
Connect the microphone to the microphone jack on the control box with the label:
and hide it where you feel most conformable, the most common places to conceal the microphone are the wrist or your chest close to your neck.
If you place the microphone on your wrist you will be able to cover your mouth while you speak 🙊.
-
Connect The Beeper Pushbutton to the connector in the control box with the label:
. Place The Beeper Pushbutton where it feels the most comfortable, for example under the big toe. Connecting The Beeper Pushbutton is optional.
-
Introduce the hidden earpiece into your ear.
In order to correctly put the earpiece into your ear read: How to put the hidden earpiece
How to use the Bluetooth earpiece
You can now proceed to the examination room. When you arrive at the exam, press The Beeper Pushbutton for 5 seconds to begin the conversation. You can also wait for your partner to call you in and then pick up the incoming call by pressing The Beeper Pushbutton for 5 seconds. You will hear the incoming call through the earpiece hidden in your ear if your cell phone is in silent mode only. Consider disabling the vibration to avoid unintended noises when receiving a call.